Skip to main content

News

Rolls-Royce successfully tests mtu engines with pure H2

Rolls-Royce announced that it has conducted successful tests of a 12-cylinder gas variant of the mtu Series 4000 L64 engine running on 100% H2 fuel. The tests, carried out by the Power Systems business unit, showed very good characteristics in terms of efficiency, performance, emissions and combustion. These tests mark another important step towards the commercial introduction of H2 solutions to meet the demand of customers for more sustainable energy.

Tobias Ostermaier, President – Stationary Power Solutions, Rolls-Royce business unit Power Systems said, “This engine will serve the market demand for hydrogen solutions in the energy transition and will be available to our customers as a reliable and clean power source for gensets and combined heat and power plants.”

The first installation of mtu engines running on 100% H2 is already planned for the enerPort II lighthouse project in the German inland port of Duisburg, as part of the development of a climate-neutral energy supply for a new container terminal.

Dr Jörg Stratmann, CEO – Rolls-Royce Power Systems said, “We see hydrogen as one of the central elements of the energy transition. It can be used for both storage of excess energy and as a fuel, not only for engines but fuel cells and cogeneration plants to generate climate-neutral electricity and heat.”

In times of low demand and high renewable energy generation from wind or solar, for example, the excess energy can be channeled through an electrolyzer to convert water to H2, which can later be used as fuel in any number of applications.

Rapid progress in efficiency, performance and clean combustion

For several months, the mtu gas engine has been undergoing bench testing and continuous improvement in terms of efficiency, performance, emissions and combustion using 100% H2 as fuel. With green H2, these mtu engines can be operated in a CO2-neutral manner in the future. For gas engines already installed, Rolls-Royce offers a conversion solution.

Andrea Prospero, an engineer at Rolls-Royce responsible for the development of the H2 engine said, “We are very pleased with the rapid progress. The very low engine emissions are well below the strict EU limits, no exhaust gas aftertreatment is required.”

Due to the different combustion behavior of H2 compared to natural gas, some engine components including fuel injection, turbocharging, piston design and control, were modified in the test engine. However, by using proven technologies within the Power Systems’ portfolio, such as mtu turbochargers, injection valves, and engine electronics and control, the development of the engine to use H2 was advanced quickly and efficiently.

First deployment for CO2-neutral power supply at Duisport

Duisport, one of the world’s largest inland ports, is working with several partners to build a H2-based supply network for its new terminal, ready for operation in 2024. In the future, most of the electricity required by the port itself will be generated directly on site from H2 in a CO2-neutral manner. This will be achieved by two combined heat and power plants with mtu Series 4000 H2 engines (with a total installed capacity of 2MW) as well as three mtu fuel cell systems (with a total installed capacity 1.5MW).

As part of its sustainability program, Rolls-Royce is realigning the product portfolio of Power Systems towards more sustainable fuels and new technologies that can further reduce greenhouse gas emissions.